Sega CD not Powering On

[Pezcore343]

Ok so I opened up my Sega CD and discovered that I have the variety of fuse which rests on the underside of the board. Does anyone have experience with this who can fill me in on what type of fuse I need to buy and where I might get one? Would it be something you can find at any hardware store or something more specialty?

EDIT: Nevermind, I'm pretty sure I just need a standard 2.5A fuse....see how I sound like I know what I'm talking about? =D It's all a farce. After a trip to Radio Shack tomorrow I'll see if my more technically inclined sibling can solder the bugger for me.

[Orion Pimpdaddy]

For now, you can just bypass the fuse by soldering a wire onto each side of the blown fuse. I did this to mine about a year ago, and it has been working fine since then, but most people will say doing that is dangerous because it will not protect against surges.

Anyway, you can order a new fuse here:

http://www.mouser.com/Search/Product...fQLhYBwA%3d%3d

Note: After ordering from that site, you will occasionally receive a catalog the size of car. You will have to call them to discontinue it.

[TheDomesticInstitution]

Soldering's not hard. I had never soldered before I fixed my arcade a few months ago. If you do attempt this, I recommend picking up a solder remover too while you're at radio shack- if you don't already have one. Find a old circuit board with a few capacitors, and practice by removing them and putting them back on. Youtube has plenty of soldering tutorials to view, as well. If you can take your Sega CD apart and put it back together, you can solder. I promise it's not hard.

[Pezcore343]

Ugh. So I finally borrowed a soldering iron from someone and had someone more experienced than I solder the new fuse to my Sega CD. It now powers on, but it lets out a high whining sound when it's plugged in (not even necessarily on, just plugged in). When I hook up the Genesis to it and power it on, and then power it off, the Genesis power light stays on. Needless to say, it still won't play any games or even give me a startup screen. I think I'm just going to give up on this Sega CD.

So on to my next question. Does anyone have a working Sega CD they'd like to send me? I don't need a boxed one or anything, just a unit that definitely works and preferably has a Sega CD power cord (I'm sick of trying to scavenge cords from my other Genesis systems). Let me know if anyone is willing to send me a unit you might have sitting around somewhat on the cheap. I'm not looking for charity, just maybe a good deal. Thanks for trying to help in this endeavour folks.

[gokugohandave]

sounds like he might have shorted a solder point, have him check it over and make sure theres no excess solder touching anything else.

[Pezcore343]

sounds like he might have shorted a solder point, have him check it over and make sure theres no excess solder touching anything else.

Alright thanks, I'll give that a shot. If that is the case, is it fixable or am I screwed?

[gokugohandave]

if there is excess solder somewhere hitting another point or component, it should be removed before it does serious damage if it hasnt done so already. The whinning sound could be your spindle motor aswell, that may have been damaged or shorted while soldering.