So, I did a quick composite mode to this TG-16 that a friend gave to me (the RF modulator is toast, so I don't know if it had this issue prior to the composite mod). You guys ever seen this sort of problem?
Click the image to see the video.
I have the mod hardwired to the board, not the ghetto D-sub connector method. I've quintuple checked the pinout, and I know that isn't the issue at this point. I'm using pin A22 for vid signal and I've used no less than 4 ground points including the board itself. This rolling image is what I get every time. I've also tried 4 TVs. A Sony Trinitron CRT, Samsung LCD, Samsung LCD monitor, Sony DLP. Same thing on all of them.