Genesis on a sony PVM not displaying blue

[Niku-Sama]

It actually sounds like you got sent the wrong cable. Sounds like jp21 and not scart.

It could also be a problem with your scart to bnc adapter being faulty too.

I imagine you get a full color picture over other video outputs. If blue had died in the system I'm pretty sure that you'd notice it over all outputs

[Gunstar Hero]

Here are some pictures that will hopefully clear up the problem that I am describing.
Here is the Sony PVM-14N6U that is giving me this headache:


Here are the Genesis to Scart and Female Scart to BNC cables side by side and connected:

[Gunstar Hero]

Here is the back of the monitor with the Genesis connected through RGB using the BNC connectors

http://imgur.com/KCD7GFN

Here is the picture when all the cables are connected (playing Sonic The Hedgehog)
http://imgur.com/S8RAo0i
http://imgur.com/jP1U325
http://imgur.com/bPhkLVi
http://imgur.com/DYwIXzq


you'll notice that no blue colors are being displayed! Sonic is showing up as black rather than blue and everything has a weird tint to it that led me to believe that something is screwy with the color blue specifically (most likely a problem with the Sony PVM monitor itself).

To do further testing I tested the monitor with only the Red wire connected through the BNC connector in the back:

http://imgur.com/QRVcly9

Red worked perfectly

Next, I tested the monitor with only the Green wire connected through the BNC connector in the back:

http://imgur.com/jAyQxGF

Green worked perfectly

Finally, I tested the monitor with only the Blue wire connected through the BNC connector in the back:

http://imgur.com/WP87Fpo

The picture barely showed up instead of showing up as all blue as it was supposed to! I took another picture with the lights off to show how faint the picture is showing up when only the blue cable is connected:

http://imgur.com/MwFYjar


So I definitely know that the problem is that the color blue is not being displayed, however I have no other cables to test on the monitor so I am unsure if the problem is with the monitor itself or the cables.

[FABombjoy]

Move the red or green BNC to the blue BNC on the monitor.

If blue appears - monitor good, cable/console bad
If not - monitor problem

[Gunstar Hero]

Move the red or green BNC to the blue BNC on the monitor.

If blue appears - monitor good, cable/console bad
If not - monitor problem

Blue didn't appear when I moved red and green to the bnc connector also the on screen menu text is displaying as yellow instead of white.