I did my mod differently..
On my system, with traces cut, the system default to ENG, 60Hz..
So, I only ever needed two 4 wires, never 6..
I did my mod differently..
On my system, with traces cut, the system default to ENG, 60Hz..
So, I only ever needed two 4 wires, never 6..
The jumpers should have a common point (left side when looking at from the front) that runs to the processor. Make sure your switch leads are both taken from the right side of the jumpers, that's where the difference is (JP1 is GND, JP2 is +5v).
My camera is actually an ancient Sony Mavica FD-73. I've seen no reason to replace it though, takes great close up detail pictures - those I posted have been scaled down considerably.