Best computer for old DOS games

[blue lander]

I'm a big proponent of playing games on the original platform rather than emulating, but I've got to agree with poofta when it comes to PC gaming. The only difference between playing a game on a "vintage" pc and dosbox is all the hassles of setting IRQs and loading TSRs and whatnot. I can see the value of playing an early 80's pc game on a real CGA monitor with an old fashioned clicky keyboard, but if it's a Windows 3.1 VGA game from 1991, who cares?

[phreakindee]

I'm a big proponent of playing games on the original platform rather than emulating, but I've got to agree with poofta when it comes to PC gaming. The only difference between playing a game on a "vintage" pc and dosbox is all the hassles of setting IRQs and loading TSRs and whatnot. I can see the value of playing an early 80's pc game on a real CGA monitor with an old fashioned clicky keyboard, but if it's a Windows 3.1 VGA game from 1991, who cares?

While I may agree, and in fact I do play all games I can on DosBox, I still prefer to play them on the real thing with a real CRT monitor and all of that. I have an IBM 5150 with a CGA monitor for the really old stuff, so that works for those DosBox screws up on. Me, I just like messing with memory managers and disk drives and failures and all of that.. Ha

[Poofta!]

While I may agree, and in fact I do play all games I can on DosBox, I still prefer to play them on the real thing with a real CRT monitor and all of that. I have an IBM 5150 with a CGA monitor for the really old stuff, so that works for those DosBox screws up on. Me, I just like messing with memory managers and disk drives and failures and all of that.. Ha

you know, dosbox DOES output to crt monitors, right ? =D

its a pc, there is absolutely no difference what hardware the program runs on as long as you can get it to run. video output aside, the control scheme and the position of your body has stayed the same since when the programmer intended it.

[NayusDante]

I've been noticing some vertical sync/tearing issues with DOSBox, which I don't get on real hardware. Just something to take into account...

[ebenezer]

cool..yeah that was the main reason i wrote this post was because i remember some of my really old games going way to fast on newer computers, CPU dependent was the term I was looking for I see. Dosbox is convenient, but its not just the games I want...i want the whole experience of starting up the machine, the grinding of the disk drives, typing in CD\..., waiting forever, glitches, all that jazz. I don't know much about installing hardware on old machines though...I was hoping for a sort of "set" where the monitor and drives are all in one--or at least something with some character rather than the normal monitor, computer, keyboard and mouse...saw some cool pics in other posts. I'll check around. Thanks.

[Ze_ro]

i remember some of my really old games going way to fast on newer computers, CPU dependent was the term I was looking for I see.

You can usually compensate for this by running programs specifically designed to slow down your computer. Mo'Slo used to be pretty much the only choice here, but there are other options these days. I haven't tried many of them, so I can't really comment on which ones work best. I do remember having a very difficult time trying to slow down my Pentium 133 enough to play Montezuma's Revenge, which I think was meant to be played on an 4 MHz 8088, as even at 1% speed, it was still too fast.

There are also all kinds of other errors that can crop up on newer computers. Sometimes the errors are also caused by the speed difference, but give you misleading messages that confuse the actual problem. Home of the Underdogs has a FAQ that lists some of them.

I don't know much about installing hardware on old machines though...I was hoping for a sort of "set" where the monitor and drives are all in one--or at least something with some character rather than the normal monitor, computer, keyboard and mouse.

A laptop might be your best bet then... but you still have to know IRQ's and IO addresses and stuff, even with a laptop... so it might not help as much as you think it will. Laptops of the time were generally bad for playing games on though... but with a newer machine, you might have trouble getting features to work with DOS (sound and CD-ROM might give you a hard time)... so you might have some trouble finding just the right balance here.

I'd recommend either a 486 or Pentium, somewhere in the 66 MHz to 133 MHz range. Look for something with ISA ports on the motherboard, that way you can be confident of finding DOS and Win 3.1 drivers for pretty much all of the hardware you'd ever put in it. Finding graphics cards, hard drives, CD-ROM drives, and floppy drives should be very easy... but finding just the right sound card might prove tricky. I'd recommend a SoundBlaster-16 to get the best compatibility. It's not the best *sounding* card, but you'll have to jump through a lot less hoops than you would with something like a Roland MT-32, Gravis Ultrasound, or even newer SB cards like the AWE-32.

--Zero

[Soviet Conscript]

i think i know what your getting at with just a pre put together old PC. maybe something from the IBM line?

i'm picking up one of these tommarow
http://john.ccac.rwth-aachen.de:8000/alf/ps2_70121/

hope it meets some of my old gameing needs. only problem though is it doesn't use ISA, think they used there own thing for this model.

I'm not a fan of useing laptops for gameing. just feels wierd to me.

[blue lander]

you know, dosbox DOES output to crt monitors, right ? =D

its a pc, there is absolutely no difference what hardware the program runs on as long as you can get it to run. video output aside, the control scheme and the position of your body has stayed the same since when the programmer intended it.

People tend to use Dosbox on PCs that use 31khz VGA monitors, which looks different (to me at least...) than an old 15khz CGA or EGA monitor.

[phreakindee]

Vsync issues, hertz issues, color issues, native resolution issues... all sorts of reasons to play on a real machine with an old CRT. And why would I have a newer Windows XP/Vista computer with a CRT for DosBox? If I'm going to go through the trouble to get a computer with DosBox and a CRT running, may as well make it a real DOS machine! I use DosBox because it's convenient, but if I really want to play, I'll whip out my 486 or Pentium with my old Compaq 14" and it's off to the games.

[OMF2097]

A 486 DX2 66 MHz(preferably with a turbo button to downgrade to 33MHz), 16mb of Ram, and a Soundblaster 16 should be more than sufficient to run older DOS games. Run Dos 6.22 as specified above and you shouldn't have any issues. If you're planning on running the original disks from Sierra, make sure you have the patch disks/files.

Don't forget an older IDE HD.

[Jorpho]

Vsync issues, hertz issues, color issues, native resolution issues... all sorts of reasons to play on a real machine with an old CRT.

The "real" machine with an old CRT will have even more issues, even if it solves those other ones, which it might not.

A 486 DX2 66 MHz(preferably with a turbo button to downgrade to 33MHz)

Turbo buttons are extremely handy, but there are much faster processors that still support a turbo button.

[JustRob]

Seriously now, how many posts and no one has mentioned the one place where discussing exactly this topic is the most bonerific thing possible?

http://vogons.zetafleet.com/