View Full Version : Fixing up a sega nomad, help plz.
SpiritualK
03-03-2008, 12:32 AM
Hi everyone, I have a sega nomad and it works but the brightness nob and the sound nob have some sort of problem, they seem kinda lose and dont really respond to well. any way on how to fix that?
thanx in advance.:-D
SpiritualK
03-03-2008, 12:57 AM
anyone?
Damaramu
03-03-2008, 01:30 AM
You've posted this in the wrong section. We have a dedicated "fix-it" section called Technical & Restoration Society. You might get better results there.
CLICK ME! (http://www.digitpress.com/forum/forumdisplay.php?f=22)
SpiritualK
03-03-2008, 01:56 AM
You've posted this in the wrong section. We have a dedicated "fix-it" section called Technical & Restoration Society. You might get better results there.
CLICK ME! (http://www.digitpress.com/forum/forumdisplay.php?f=22)
Thanx
InsaneDavid
03-03-2008, 03:14 AM
You've posted this in the wrong section. We have a dedicated "fix-it" section called Technical & Restoration Society. You might get better results there.
CLICK ME! (http://www.digitpress.com/forum/forumdisplay.php?f=22)
Also you may want to wait more than twenty five minutes before bumping a post. We do have lives you know, and even if we didn't it would probably take up to if not more than 25 minutes to see your thread, click on it, read your posts, click reply, write a reply, and click submit. (especially with technical stuff)
omnedon
03-03-2008, 10:41 AM
That little knob is a potentiometer. It's likely come loose or worn out. If you are lucky, reflowing the solder points could help. If not, it would likely have to be de-soldered from the board, and a replacement knob installed.