Wires inside a DC Controller?

[dao2]

Hey all,

Anyone know what the wires inside a dc controller do?

I was trying to figure it out and here's my very tentative list.

Black and Red: I figure these are power wires, but didn't try
White: Controls, I think :|
Green: Nothing? I cut it and everything seemed to be fine?
Blue: I THINK blue is for vmu/memory but I'm not at all sure

These are the wires inside the controller btw ;p

[izarate]

Green: Nothing? I cut it and everything seemed to be fine?


Might be for the Jumper Pack.

[dao2]

Might be for the Jumper Pack.

whats a dc jumper pak o_0

[Cryomancer]

jump pack is the rumble add-on

it COULD have something to do with time stuff, or microphone, also. I believe xbox controllers have a "spare" wire in there as well for something similar.

[yoshi64]

This might be helpful: http://mc.pp.se/dc/controller.html

[c0ldb33r]

I believe xbox controllers have a "spare" wire in there as well for something similar.
You're right, to an extent. I think you're thinking of the yellow wire. But it's not really a spare, it's used for light guns.

I severed the yellow wire in port one on my xbox and rerouted it to the on/off switch. On the controller side I rerouted the yellow wire to a button I installed. It lets me turn my xbox on/off remotely :)

[dao2]

This might be helpful: http://mc.pp.se/dc/controller.html

Wow thanks that's super helpful :o but what does the green meen?

" green sense (connected to GND inside controller/keyboard)"