PDA

View Full Version : sega repair



raylydiard
01-10-2009, 09:43 AM
hi i have a sega cdx and need to replace the voltage regulator i have tryed 7805 but dont work and i am useing a 9.5v 1.5amp power pack

izarate
01-10-2009, 12:16 PM
Is the regulator getting power? Is the regulator outputing power?

raylydiard
01-10-2009, 07:45 PM
no i have checked the fuse and the fuse is fine

izarate
01-10-2009, 11:50 PM
No what?

- Is the 7805 getting power?

- Is the 7805 outputing power?

raylydiard
01-11-2009, 03:08 PM
none of them

izarate
01-11-2009, 05:47 PM
Ok, if the 7805 isn't getting power, check if the solder points in the power jack are good. Reflow if needed.

http://img507.imageshack.us/img507/2456/img4926qg1.jpg

Try testing all the components that are laid from the power jack to the regulator. If that fails, try soldering a wire directly from the power jack to the regulator. It might be that some traces on the PCB are damaged.

raylydiard
01-11-2009, 08:25 PM
yes thanks i have checked and refulxed it with the luqid type and they still dont get power