PDA

View Full Version : Kega Fusion Sega CD help.



Tupin
02-16-2009, 01:27 PM
Okay, so I noticed a lot of Sega CD games I attempt to load in Fusion do not load or freeze up. I've gotten this problem with Sol-Feace and Bram Stoker's Dracula. Sol-Feace freezes at the "Licensed By Sega" screen, and Bram Stoker's Dracula doesn't load past the "Beware" screen despite the music playing. Some games like Double Switch seem to work fine, though.

It can't be a bad rom, because I've tried both games and neither of them work fully, using an actual disc or otherwise.

Any ideas?

otoko
02-16-2009, 01:42 PM
Try several different bios.. I've had to use about seven before I found a working one... even then sometimes I need to change to a different one.

Tupin
02-16-2009, 02:18 PM
Try several different bios.. I've had to use about seven before I found a working one... even then sometimes I need to change to a different one.
The BIOS's work, is it just like a problem with compatibility?

otoko
02-16-2009, 03:04 PM
For me it was.. besides.. I've used several bios and they all "worked".

Oh, this one has worked the best for me and Fusion: Here (http://www.megaupload.com/?d=PDW7GORQ)

Tupin
02-16-2009, 03:37 PM
For me it was.. besides.. I've used several bios and they all "worked".

Oh, this one has worked the best for me and Fusion: Here (http://www.megaupload.com/?d=PDW7GORQ)
Hm, it won't let me open/extract it. :/

otoko
02-16-2009, 03:43 PM
extract what?

It's a .bin file I believe..it's already all set to go.

All you need to do is go to options ---> set config ---> Sega CD tab --> browse to where you have it. It's all set to go.

Tupin
02-16-2009, 03:51 PM
Just curious, do the games I have problems with work for you?

evildragon
02-16-2009, 03:52 PM
Enable PERFECT SYNC. This is in the manual for fusion.

otoko
02-16-2009, 03:54 PM
Hmm, other than loading the bios I have always run Fusion cold.

I'm currently playing Penn and Teller's Smoke and Mirrors off my disc drive.

Tupin
02-16-2009, 04:00 PM
Enable PERFECT SYNC. This is in the manual for fusion.
THANK YOU SO MUCH, IT WORKS. :D

Tupin
02-25-2009, 09:42 PM
Okay, new problem.

Corpse Killer loads, but when I get to the "Start Game" menu I cannot select anything. Do I have to have a lightgun or something? I thought you could play it using the controller....

dreamcaster
02-28-2009, 10:04 PM
Okay, new problem.

Corpse Killer loads, but when I get to the "Start Game" menu I cannot select anything. Do I have to have a lightgun or something? I thought you could play it using the controller....

I thought Corpse Killer was a CD-32X game, which doesn't work without a 32X installed?

Tupin
02-28-2009, 10:23 PM
I thought Corpse Killer was a CD-32X game, which doesn't work without a 32X installed?
It's not a CD 32X game, it just has Sega CD on it.

otoko
03-01-2009, 02:07 PM
I thought Corpse Killer was a CD-32X game, which doesn't work without a 32X installed?


The the visually enhanced release I thought.

evildragon
03-03-2009, 04:32 PM
There is two versions of the game. Standard and 32X...