SNES Power Slide SFX (1994-12-04) (Europe)

[MatthewCallis]

I recently posted this up on my blog, if anyone gets it running please, let me know! It works fine (usually) on real hardware. You will needs a Super FX2 board if you try to run it.

Power Slide SFX (1994-12-04) (Europe) SNES ROM (http://eludevisibility.org/power-slide-sfx-1994-12-04-europe/)

[poloplayr]

Very cool!

LOVE your website.

[pootle]

Cool:) Gives me an excuse to make a SFX EPROM board:) Do you have any more details of the PCB this was on originally (SRAM, oscillator speed, clock pin connected on edge connector, etc)?

Andy.

[badinsults]

Thanks for the release, MatthewCallis. I featured it on Snes Central. Would it be possible to get a scan of the PCB board, or at the very least the PCB board type and version of the Super FX chip (this information may help with getting it emulated)?

[MatthewCallis]

I'll try to get the scan tomorrow while at work. As for getting it emulated, from the people I've spoken with (d4s and then byuu) it's not a priority and would require lots of work to get a cycle accurate SuperFX code written, so it will at the very least be a while.

[ProgrammingAce]

It'd be nice if Assembler wasn't the only person on the planet with a working SuperFX dev system...

[hellfire]

Matthew keep up the good work, I love your website and I am currently looking to get some protos leaked, I have already set up a deal to buy a couple and I will dump the protos and give them to you when I buy them

[MatthewCallis]

Here's a scan as promised, its really big so it's linked:

http://eludevisibility.org/img/bbs/powerslide-scan.jpg

[poloplayr]

Matthew keep up the good work, I love your website and I am currently looking to get some protos leaked, I have already set up a deal to buy a couple and I will dump the protos and give them to you when I buy them

And will these be SNES/SFC dumps? Just double-checking! :)

*salivating*

[PACHUKA]

Awesome release! But you forgot to hack your name into the title screen! ;)

[badinsults]

I'll try to get the scan tomorrow while at work. As for getting it emulated, from the people I've spoken with (d4s and then byuu) it's not a priority and would require lots of work to get a cycle accurate SuperFX code written, so it will at the very least be a while.

Pagefault managed to get Star Fox 2 to work, and I think he even had some success getting some demo rom from an early version of the original Mario Chip working.

It looks like this PCB has a lot of simularities to Dirt Trax FX, though I have not seen a GSU1A Super FX chip. It is quite possible that this is a chip that is a prototype of the GSU-2 chip (commonly known as the Super FX 2 chip), and it might be very difficult to get emulated.

[hellfire]

And will these be SNES/SFC dumps? Just double-checking! :)

*salivating*

It depends on what I can find, Ill let you know when I purchase them

[i2a2n2]

I just wanted to start out by saying thank you for releasing everything that you have so far I thoroughly enjoed the Kirby's pinball that you have released as well. I have gotten this game to work on original hardware I have also made 3 different video's showing that I have gotten this working on original hardware. I made a little write up on it over on nintendo age.com in the everthing else sub section.

again thanks a bunch, when I get a chance I'll be donating to your website hopefully it will help. :)

press the 2 top shoulder buttons at the same time and it reset's your car at the start line.

[MatthewCallis]

I just wanted to start out by saying thank you for releasing everything that you have so far I thoroughly enjoed the Kirby's pinball that you have released as well. I have gotten this game to work on original hardware I have also made 3 different video's showing that I have gotten this working on original hardware. I made a little write up on it over on nintendo age.com in the everthing else sub section.

again thanks a bunch, when I get a chance I'll be donating to your website hopefully it will help. :)

press the 2 top shoulder buttons at the same time and it reset's your car at the start line.

Thanks, I've got more coming but I'm having a hard time finding time between me breaking laptops and me going to work, I have plenty more to get through, and a few more on the way.

[MatthewCallis]

The latest bsnes (http://byuu.org/) snes emulator (http://byuu.org/) now supports this ROM.

[PACHUKA]

how well comaredto your hardware setup?

[badinsults]

how well comaredto your hardware setup?

I seriously doubt that byuu would release something that doesn't almost perfectly replicate the original hardware.