View Full Version : Someone with an NTSC SNES...
cheaterdragon1
05-07-2010, 04:27 PM
Can you look on your power adaptor and tell me the following numbers:
Input
Output
and the amps
I need to know what they are so I can splice together an AC adaptor for one.
Cyanotic
05-07-2010, 05:18 PM
Allow me.
Model No. SNS-002
Input AC120V 60Hz 17W
Output DC10V 350mA
cheaterdragon1
05-07-2010, 05:34 PM
Allow me.
Model No. SNS-002
Input AC120V 60Hz 17W
Output DC10V 350mA
Are you sure about the 350mA's? The Genesis is like 3 times that. 350 just seems too low.
It's 850mA. The 8 looks like a 3 in low light (just checked).
cheaterdragon1
05-07-2010, 05:51 PM
I would just like to confirm then, these are the correct specs:
Model No. SNS-002
Input AC120V 60Hz 17W
Output DC10V 850mA
JimmyDean
05-07-2010, 08:26 PM
I was just about to say: "Wow, 350ma? My watch draws more current than that!" but I was too late... Wait, I don't have a watch!
JimmyDean
05-07-2010, 08:27 PM
Wait! Don't do ANYTHING unless you found out if it was center-positive or center-negative! Unless you want a dead SNES...
I would just like to confirm then, these are the correct specs:
Model No. SNS-002
Input AC120V 60Hz 17W
Output DC10V 850mA
Confirmed (http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-MW1085VG-SN-/28-2095). I also checked it myself on my own power supply.
rimsky82
05-10-2010, 12:59 PM
I would just like to confirm then, these are the correct specs:
Model No. SNS-002
Input AC120V 60Hz 17W
Output DC10V 850mA
It's a negative center.