View Full Version : Snes not displaying
leatherrebel5150
02-24-2011, 07:31 AM
I have a original style SNES that I found in my attic the other day(forgot I had) and it does not display anything when turned on. I opened it up and cleaned everything and used hookups I know are good because I use them with my SNES mini. Any ideas to what it could be.
wingzrow
02-24-2011, 08:08 AM
The red light DOES turn on so you know it's getting power right?
leatherrebel5150
02-24-2011, 09:23 AM
Yes the red light comes on and the screen turns black like a signal is reaching the tv just not displaying picture or sound.
wingzrow
02-24-2011, 11:32 AM
Try and isolate the problem.
Have you tried more than one game? Have you tried more than one tv? Have you tried different cords?
leatherrebel5150
02-24-2011, 11:46 AM
The cords, tv, and game all work because I used them all with my SNES mini version later that night.
drmay
02-24-2011, 12:17 PM
Really sounds like dirty contacts, clean the SNES connector, sometimes some sandpaper wet with a little windex and slide it in and out if you don't have a cleaning kit works well.
leatherrebel5150
02-24-2011, 12:24 PM
Cleaned it extensivly both the system and games, still nothing.
JohnnyA
02-24-2011, 03:31 PM
Using RCA or RF?
leatherrebel5150
02-24-2011, 05:55 PM
Using an aftermarket thing that plugs inyo the cable jack, im guessing its an rf, I know it works since I use it with other systems, both it and SNES set to ch.3
Gameguy
02-24-2011, 06:54 PM
Using RCA or RF?
If he's using the same hookups for his SNES mini he has to be using the console's AV output.
I would guess dead capacitors since it was kept in an attic, but first check if it works with it's own RF output instead of with that aftermarket output.