New Pokedex GBA Mod (Alpha Sapphire & Omega Ruby)

[teh_d3th_st4r]

Alright people, it's been a while.
I just stumbled on my next build.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/pokedex-pokemon-omega-ruby-alpha-sapphire_zps0f7dcfe5.jpg

I have everything I need for this build except for the back-lit screen.
What do you guys think?

Found a significantly better picture of that pokedex.
I'm ordering some materials to make this happen (along with the stuff I need to finish my Pokedex GBA SP, and my Travel NES).

I will be pleasantly busy for the next few weeks.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/pokedex_art_zpse8045b27.jpg

[teh_d3th_st4r]

Let's get started.
Funky GBA with a bad screen: CHECK

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Mobile%20Uploads/2014-07/DCF91300-B3AA-4B3D-8D6C-5E2D2ACBF70C_zpspyitkymj.jpg

Dismantle, kern, take pretty picture of meticulously arranged components: CHECK

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Mobile%20Uploads/2014-07/59A9FBFA-EB9B-443D-9806-3A52450D3644_zpsxxpyqpde.jpg

This is why you don't leave your GBA in the sun, children.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Mobile%20Uploads/2014-07/F5BB9BC6-E524-4182-A429-9B966B13734D_zpsbiwezlyf.jpg

But it's okay, because I have this broken AGS-101 with a *salvageable display.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Mobile%20Uploads/2014-07/56592435-ACD2-4B52-A82E-4F54FE256D05_zpswurp1w7k.jpg

Confidence is high on this project.

What would be the point of my builds if there wasn't any intense grafting of plastic pieces?
I had to move the d-pad to match the pokedex.
There's going to be a lot of cutting, filling, bracing, and sanding involved... I love this shit.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/2E877606-90FA-4024-8E12-E77A678A5783_zpsctsahs3o.jpg

Plug the new gaping hole with some scrap plastic from another project.
Mark it for D-pad relocation.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3742485F-510B-45F4-AF87-8CC4D1AE925E_zps8d73t2a3.jpg

Cut along the dotted line, and relocate that sonofabitch!

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/96B42567-66B0-4E05-865C-F1F38DF9F5E9_zpsg975kcif.jpg

Look at that... this going way more smoothly than I anticipated.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/48F28E75-ACE2-4585-8D14-33B0385BE926_zpsafmyb7ok.jpg

Need to fill the area where the screen protector goes.
The lens is square in the rendering, so it needs to be square for my build.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C5A6F36D-D0E4-4AD4-908D-35F7E61A78A1_zpsnsa3vgwt.jpg

I took the old lens and traced it onto a scrap piece of poster board. Cut it out and fit it to the shell.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/8857DF70-6DA1-456E-928A-79860BB4E5F3_zpsgetbeo1o.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/D65E813C-BF51-4CE6-B664-28A529BEF583_zpsu6csxi1s.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/CABDDE8A-A5B8-4D16-91DB-59A11A38FB91_zpsomfm08xj.jpg

I marked the edges of the opening to the back of the poster board, cut it out, and traced the pieces to some 040" styrene sheet.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/975D8652-13FE-4AE6-B8A2-1199854C98EB_zpsf98qlwpw.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/EF770DDF-3F37-4BD4-A9D8-994AACC04C11_zpsopkhwndn.jpg

Glued the styrene in place.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/CF9878FC-CE37-4C6A-9F75-0BEF925BB6D5_zps2hhcn6jw.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/76B01DD0-B464-407D-9837-F9EBE15FB74F_zps1yoml7mw.jpg

Then I sanded the ever-loving shit out of it with a block and P320 until everything was flush and flat.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/F308B0B6-FEE0-4F6D-A982-6AC5868180BA_zpsjuxr89gx.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C818829D-8BD9-429E-B5FC-F88A567B5ED5_zpskcfxpgjn.jpg

This thing is coming together nicely.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/DE28277F-3E23-4952-A639-260A5CBCDC94_zpsl6hobuos.jpg

[teh_d3th_st4r]

Time to do some of that marvelous detail to the face of this thing.
Traced it out, made poster board fascia pieces.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/5EF27682-7587-46EA-B9E9-43C51C552DFB_zpslwojvpp2.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/7F36AF40-FB47-4F98-8D92-23B0ACB38A7B_zps81twy4zr.jpg

Yeah... I totally forgot to take picture of me cutting out all of the pieces of 040" styrene, but I assure you; it wasn't anything exciting.
Anyway, top piece is glued on and contoured, the bottom still needs to be drilled and cut for the speaker vent and start-select.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/8B99FF6C-9E70-4292-ADAE-892CD89A2CAA_zpsgky0ullt.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/14F9E119-EB04-401C-965E-744C5C718B0F_zpsoxlq6rn9.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3E453EF9-390F-4627-95F7-8E376DA4E5A5_zps6gr3cgfo.jpg

Stay Tuned.

Just doing a little more detail on the face plates.
I found that it was easier to glue the bottom plate in, and the drill and cut with it in place.
Patience and a steady hand serves me well.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/E0FB91DF-C54C-4BA9-B52A-089F8D0FA51D_zpswztfwc1n.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/5FD6D6CB-D830-46A6-8EC2-0DC446119CB5_zpsasoxby7v.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/001E5ECB-5788-4F6D-93FF-C301CD13A816_zps3dsmuqdr.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3A2D7BD5-6897-4FE1-B8D7-B10612EC3968_zps1eqrqjrc.jpg

I cut and installed the frame edges.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/76F98E3E-0007-4420-83FB-B6B3B4E39DB3_zps6w8dmlh7.jpg

I was planning on getting a piece of gorilla glass to go with this thing (and I might still do that) but the lens was in pretty good shape, so I simply cut it to fit.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/30572B67-4DE6-402B-B346-1A81675760C9_zpsxa1wthh5.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/AF69B347-EC3E-4548-8B90-5713A81DA885_zpspw81vsim.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/6783DC69-2729-4F80-9272-10A15B2B85B5_zpsudbklvtn.jpg

I did a little sanding and cleanup just to make it look a little more crisp.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/B51447E0-EF19-47F9-AF10-E21BD3632889_zpsgymubud9.jpg

What do you guys think so far?

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C422FC0F-9F5E-4481-9452-C619175A9144_zpscbhnjpbt.jpg

[teh_d3th_st4r]

Then there was that one time when that I didn't plan my order of operations, and I suddenly had to build the part that should have been done first.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/pokedexdpad_zps41848890.jpg

I need housing for the D-pad/Lens/Whatever.
This broken Gamecube controller looks like it will work nicely.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3E71CDE0-ECEB-49FB-8B9E-363940A964F6_zps0cgqcd8y.jpg

Thickness is pretty much perfect.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/DC8D4AC9-E9BA-4A6B-91F5-3758CF22F9B6_zpsnwex76gg.jpg

Time to hack away at it with reckless abandon (like I always do)

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/B2EFBE46-B397-4517-AB2B-4C3906F1145F_zps6ozmrugm.jpg

The top half needs to be the correct depth so I can have both halves close back together as if it were a manufactured product.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/62877423-4A96-4D82-B2DB-E50EB869F524_zpsa23pfrps.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C7432F02-48F0-47F8-8123-5EE1E78BAE6C_zpsmh7gqn9z.jpg

Amateur videogame surgery is one of my favorite games to play.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/17E89CF5-7E23-4300-B42A-B4A0BCD8DBDD_zpsmnfgsicd.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C6F1C6B4-F472-472A-BD57-ECDE09DFACE6_zpshgvlcdbt.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/EFF90D0A-16EC-42E3-90D8-682CA675A4DD_zpsyevlfuje.jpg

And now I have to go out and pick up another GBA I found on CL for $10... I need working internals and another set of shoulder buttons to go on the bottom.

I'll be back later.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/687E643C-51BD-426F-9446-9CA6A5E26AC1_zpsdcf4yhft.jpg

Went and picked up another GBA off CL.
But we don't need that just yet.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/A3699D32-FD05-4ECC-9A36-F18FB4DA1B81_zpskrs6nzol.jpg

Time to fit the rear half of the D-pad housing.
Observe.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/225C0D0B-7DEA-4453-B3AB-D611C44B8376_zpsdkdierps.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/4F5E2BA7-CF3B-48F0-9E88-92F5921CA824_zps4akv1gvg.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/FDD7FFDD-E682-4102-AC44-1B9855DEAC46_zpsxzbepyeb.jpg

This was actually a little fidgety to cut out.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/374927F3-5A36-4221-AACF-A025B552734D_zpsjtzv33sa.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/009E6445-EF43-4FF9-B68B-9B56538E3DAF_zpsyvkcv38h.jpg

Now I need to do some shimming, sanding, and figuring out how to mount everything in there and get it to look right.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/56D5E95B-9D1B-4129-B47D-C2F2CB1C0D97_zpskj6cp1nq.jpg

[teh_d3th_st4r]

Now it's time to do the thing with the face of the D-pad housing.
Not sure how to explain it in words, but I thing the photos manage to make the process pretty clear.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/9FBEA0CE-7C7E-4C92-B209-B2913A7532AA_zpsymbzpqpe.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/4CAB1D98-FCCA-464C-9B78-B16B841176B6_zpsgr5lcefn.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C454988A-561F-4CAE-9B6B-F2FD70EC99CD_zps5ecnkmcn.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/C7810A2A-C73A-46E2-99A9-01068E7AF418_zps4pooo5qx.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/6534D0E5-C6C3-4A93-9B43-8550747D50A5_zpskrqhgnl9.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/CD67B12C-46A8-4AB7-9BE4-182194FBF213_zpslzpxkesi.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/E669793F-D69F-4B88-B0AE-8F2DBAE6EC99_zps9lqntori.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/45B9A71F-A5D8-4941-BB29-ABF41550397D_zpsfe46vbmb.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/278FC55C-01E8-44CB-8A8F-2BAFD2082BBF_zpsgqvgvtmh.jpg

I'm not gonna lie; this was pretty fidgety, but I'm very pleased with the results.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/295AE881-2564-4838-A0A8-476D3F3A0EA2_zpslmhvwjsr.jpg

I almost forgot the groove down the side.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3FB29A28-EF9E-4C68-B95D-D17B1B901CEB_zps6kzzv3tu.jpg

Ahhhh... That's better.

Alright... Now I need parts from the new GBA.
Time to fit the other set of shoulder buttons to the bottom of the shell.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/A02362C9-895B-46F2-AAD9-25EDF52E88A3_zpsgjzhh9id.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/1ac1dea1-1d97-456b-9499-72d42fe31a53_zps024a92f0.jpg

I always reach that point in a project where I'm not sure what I'm supposed to do in order to get the results that I want... so I just start cutting.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/BB2A2A1D-27FF-4AEB-8CE8-87B123C69C6C_zpszyfrsjmn.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3B405564-7CC6-42B8-852B-4EA3F0320FAB_zpshhdbwlqu.jpg

I've certainly go a knack for making things work when I don't know what I'm doing.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/492F9D2B-408D-4729-A648-7AEC3453D881_zpsaf0rvnqi.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/3257FB58-A125-4BB8-BCF8-52EC063541C8_zpsw4u39nri.jpg

Stay tuned for the undoubtedly complicated relocation of the power switch, headphone jack, and volume controls.

[teh_d3th_st4r]

This is what I've got so far.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/DBF9635A-F1BA-4DA1-BEE3-792A3A3B7497_zpsyfstvcmx.jpg

Feedback?

There's been a lot of questions and speculation across the outerwebs in regards to how I'm constructing this.
Hopefully this will help quell the onslaught of suggestions and inquiries from people that don't think I know what I'm doing.


http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/labeled_zps7fe3ae2b.jpg

EDIT: Yes, I realize I spelled "backlight" wrong. I misspelled it so it would fit on the screen.

[teh_d3th_st4r]

I uploaded one of my progress pics to DeviantArt... and it's easily the most popular thing I've ever posted.
Over 400 views in 8 hours!

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/5FE5B212-47B6-4C99-8CCA-8FFB54D1573E_zpsnz10nlaj.jpg

[Flare65]

Very cool to see this take shape! I love seeing projects like this! Can't wait to see more!

[teh_d3th_st4r]

Now I'm just waiting on parts.

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/81575074-6804-42DD-A5E1-B0C5BA06C8EB_zpsvzclaovk.jpg

I've also come up with another Pokedex build... But I need to finish this one first.

[teh_d3th_st4r]

So, the AGS-101 screen I ordered was defective... Lame.

I decided I'd work on the shell a little more, and give it some of the contour detail work.

BEHOLD!

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/4E02B42C-58B0-4B9D-B373-4A0C85F15AC7_zpsutdebwsg.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/40610002-BB5F-4099-94E7-0E8D75B9B5A3_zpsum2x6l6y.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/bed32095-717a-4512-8efb-6ad0162c9c05_zps4121f3ad.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/a864e703-30fc-406b-a2c7-1efb74d65b47_zpsf0bfddb2.jpg

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/251C92A6-83F1-41E1-AF03-D91363D9B12E_zpsvqb8plod.jpg

And the rad folks over at Rose Colored Gaming love my build, so they dug through some stuff and hooked me up with a custom cast set of translucent green GBA buttons!

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/gbabuttons_zpsdbb17a78.jpg

[teh_d3th_st4r]

Still waiting for the replacement for my new screen... They're apparently no longer being manufactured.
But for the time being, I can still move forward with the rest of the mod.

But my custom buttons from Rose Colored Gaming finally arrived!

http://i1303.photobucket.com/albums/ag146/teh_d3th_st4r/Custom%20Consoles/F8269B56-69B9-4E8A-9300-D060AFE6FD5B_zps9mmmzvpa.jpg

Aren't they glorious?

[Hawksmoor]

Very nice work thus far! I look forward to seeing the finished product.