Question about Nintendo Playchoice 10 Control Panel Hook-Ups

[NintendoMan]

HELLO everyone. I just needed some MAJOR help with my playchoice 10 control panel hookups. It has to do with the 5 top menu buttons. Let me tell you the story first.

The question I have is for my dual playchoice that I own right now. I did own the single playchoice monitor and ALL the buttons on that were in MINT condition. The ones on my dual were defiantely not. So I decided to switch ALL the single playchoice joysticks and buttons to my double. Well, I sold the single control panel along with everything on it.

My question is can I use the same hookups that were on my single and get it to fully work of my double cabinet playchoice. I can get about 3 out of the 5 top buttons to work, but not all at once. I wrote down the colors of what wire was suppossed to go where, but some, not all, of the colored wires of the single were different from the colors from the dual playchoice.

So if anybody could send me a list of what wires are suppossed to go whereit would be SOOOOOOOO appreciated!!! If you can please send the info by colors (I am not that technical with the wires, I can only talk and use them by colors).

THANKS!!! :D

[98PaceCar]

I hope this will get you closer than you are now...

http://www.basementarcade.com/arcade/library/manuals/p/index.html

If it doesn't, let me know. I've got a dual monitor pc10 cab in my garage, but it will take me a little while to get to it (it's about 5 rows of games back). I can pull the control panel and see if I can get the info you need.

98PaceCar