How do I reprogram an Ultraracer 64 controller?

[Wookie]

I picked up one of these used for playing Mario Kart. It seems the previous owner reprogrammed it so that the trigger on the bottom no longer functions as the throttle. Anybody have a manual or know how to reprogram it (or maybe just reset it to the defaults)?

[l_lamb]

Here's the instructions on how to relocate buttons:

1. To assign one button (i.e. "R") to perform another buttom function (i.e. "Z"): Press and hold the SET button for about 1 second to enter the "FUNCTION SETUP MODE", the FUNCTION SETUP LED will illuminate and two beeps will be heard.

2. Press the button (i.e. "R") you would like to reassign one time, the FUNCTION SETUP LED will blink once and a single beep will be heard.

3. Press the new, desired function (i.e. "Z") one tim, the NORMAL LED indicator will illuminate instead of the FUNCTION SETUP LED. Two beeps will be heard. The setting process is now complete.

The UltraRacer 64 will only return to its default setting when the buttons "A", "L", and "R" are pressed at the same time BEFORE you turn on the console's power. After about two seconds, the UltraRacer 64 will generate three beeps to acknowledge reset button configuration is set. To reset a particular button, first press the SET button, then press the relocated button twice and then press the SET button once more until the LED light goes off. THe button's original function is used as a default button for further relocation.

Hope this helps!