View Full Version : TurboDuo doesn't display video
GarrettCRW
05-22-2006, 01:38 PM
I just got my hands on a TurboDuo, but it doesn't seem to be outputting any picture (the drive works, though, and the sound is fully functional). Does anyone have an idea as to what be wrong (and whether or not this is a job for D-Lite)?
omnedon
05-22-2006, 01:54 PM
How are you connecting it to a TV? Straight in with composite video? Nothing between them like a VCR, etc?
GarrettCRW
05-22-2006, 03:10 PM
How are you connecting it to a TV? Straight in with composite video? Nothing between them like a VCR, etc?
I've tried connecting directly to the TV and via my switch boxes (like the generally well-behaved systems).
InsaneDavid
05-22-2006, 05:23 PM
The video cable could be broken down by the connector at the end, this was the case with my right audio connector. Slip back the yellow cover and check to see if the little arm that the outside of the cable connects to is broken off or has a bad connection. If so then either replace or repair it. My right audio connector appeared to have been pulled on pretty hard when it was plugged in at one point, causing the damage.
GarrettCRW
05-22-2006, 06:43 PM
It's not the cable, because I've got more than one, and the cable that I know is working doesn't fix the problem.