Results 1 to 20 of 61

Thread: The Sega Neptune!!!!

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #33
    Insert Coin (Level 0) Longhorn Engineer's Avatar
    Join Date
    Jan 2008
    Location
    Austin, Tx
    Posts
    22
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Are your wires as short as possible and of equal length? Are they twisted up or separated. Try sticking a sheet of card board between the two rows to help keep them apart.

    This is the same issue I had when I used ribbon cable.

    If all else fails take a sheet of foil and fold it into 3 layers. Cut it to fit in between the two rows. Solder a wire onto it and connect it to ground. Cover the foil with packaging tape and use it to separate the two rows. In effect you are creating a cheap RF shield. Don't know if it will work but you can try.

    Oh and I want to see some pictures!!

    edit// measure the 5V lines on the cart slot on the 32x side and make sure it isn't fluctuating.
    Last edited by Longhorn Engineer; 01-17-2008 at 08:38 PM.

Similar Threads

  1. Sega Neptune 3D Model
    By DK1105 in forum Classic Gaming
    Replies: 37
    Last Post: 01-26-2024, 07:36 PM
  2. The Sega Neptune
    By ReaXan in forum Classic Gaming
    Replies: 70
    Last Post: 07-19-2016, 10:02 AM
  3. How to build a Sega Neptune
    By Longhorn Engineer in forum Technical and Restoration Society
    Replies: 12
    Last Post: 08-17-2008, 11:33 AM
  4. Sega Neptune
    By alec006 in forum Classic Gaming
    Replies: 7
    Last Post: 08-09-2005, 04:00 AM
  5. Did the Sega Neptune ever come out?
    By Anthony1 in forum Classic Gaming
    Replies: 11
    Last Post: 07-11-2003, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •