I have an Electrohome G07 CBO monitor - Tube has some burn in, main board has some cut wires going to the neck board which can be repaired. Everything was working prior to removal (needed cap kit), I just wanted to use a PC monitor in the project. I should also say that everything is very dirty. I also have the original high voltage power supply / transformer. The cabinet these were removed from was a centipede cabinet in its former life and had been converted to an SF2 when I got it.

Offered as-is, pick up is at my place in NJ, zip 07016, no shipping. Send PM. It goes in the trash next week if no one wants it.