Results 1 to 14 of 14

Thread: FS: ColecoVision component video mod kit

  1. #1
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default FS: ColecoVision component video mod kit

    Hi there,

    I'm in the late stages of developing a Component (YPbPr) video mod for the ColecoVision. The price will be $45 US each, including mailing to US or Canadian addresses. I don't frequent DP too much, but I thought some of you might be interested in this. If you are, either reply in this thread or send me a PM. Payment won't be required until the boards are ready to be shipped.

    The mod will be sold as an assembled kit. the PCB will be populated by me. However, you or someone else will need to open the case, drill some holes in the back of the console, attach about 7 wires to the CV board, and modify the shielding around the CV board.

    Additional details, progress, and pictures can be found here: http://www.atariage.com/forums/topic...-colecovision/

    Thanks for looking,
    5-11under

  2. #2
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Hi there,

    In case anyone is still interested, the pre-order reservation list will be open through the Thanksgiving weekend at least. I'll be building some extra units which will be available on a first-come first-served basis, although the caseless video test cartridge won't be free at that point.

    Thanks,
    5-11under

  3. #3
    Pear (Level 6) Soviet Conscript's Avatar
    Join Date
    Feb 2006
    Location
    Pittsburgh
    Posts
    1,361
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    i kinda want this but money is tight and i already have an s-video modded coleco so its hard for me to justify.

    awsome work though

  4. #4
    Cherry (Level 1)
    Join Date
    Dec 2007
    Posts
    231
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Do you have an RGB mod for this system? That would be better!

  5. #5
    Pear (Level 6) Soviet Conscript's Avatar
    Join Date
    Feb 2006
    Location
    Pittsburgh
    Posts
    1,361
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by eastbayarb View Post
    Do you have an RGB mod for this system? That would be better!
    only margionally. and most people don't have monitors capble of RGB. its probibly more convient to use component which most tv's now days have.

  6. #6
    Cherry (Level 1)
    Join Date
    Dec 2007
    Posts
    231
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    My question was directed at the guy selling the mod

  7. #7
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by eastbayarb View Post
    Do you have an RGB mod for this system? That would be better!
    Hi eastbayarb,

    The ColecoVision video display processor outputs something fairly close to YPbPr/component, so that is a natural output to choose. The signals could be transformed to RGB, but there would be no improvement to the signal by doing so.

    Thanks,
    5-11under

    By the way, the PCB layout for the mod is complete and has been verified, so I'll be ordering the boards first thing Monday morning. That's the pre-order deadline.

  8. #8
    Cherry (Level 1)
    Join Date
    Dec 2007
    Posts
    231
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by 5-11under View Post
    Hi eastbayarb,

    The ColecoVision video display processor outputs something fairly close to YPbPr/component, so that is a natural output to choose. The signals could be transformed to RGB, but there would be no improvement to the signal by doing so.

    Thanks,
    5-11under

    By the way, the PCB layout for the mod is complete and has been verified, so I'll be ordering the boards first thing Monday morning. That's the pre-order deadline.
    Pure RGB is better quality than Component Video, especially if you have an RGB capable (15khz) monitor. Most people think that component video and pure RGB is the same, but component video is a compressed version of it.

    If your board could output pure RGB, I will take one of these. I don't suppose you have one of the boards planned for intellivision or Atari systems?

  9. #9
    Pear (Level 6) Soviet Conscript's Avatar
    Join Date
    Feb 2006
    Location
    Pittsburgh
    Posts
    1,361
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    PM sent. i tried to resist but i'm a sucker for things like this

  10. #10
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by eastbayarb View Post
    Pure RGB is better quality than Component Video, especially if you have an RGB capable (15khz) monitor. Most people think that component video and pure RGB is the same, but component video is a compressed version of it.

    If your board could output pure RGB, I will take one of these. I don't suppose you have one of the boards planned for intellivision or Atari systems?
    If the source material was higher quality, then yes, I agree, that RGB would be better. However, in this case, the source is very close to being YPbPr/component, and conversion to RGB (or VGA, DVI, HDMI, or DP for that matter) would not in itself improve the quality of the picture. Sorry, you'll need your own converter at this point.

    Thanks,
    5-11under

  11. #11
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    For the Atari 2600, I'd investigate Longhorn Engineering's S-Video mod. That seems to be the best available, and S-Video for Atari is a natural choice. For the Intellivision, I'm not sure the best solution.

    Thanks,
    5-11under

  12. #12
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Update: PCBs have been ordered.

    I've ordered some extra PCBs, so if you'd like to order one in the future, feel free to send me a PM, and I'll see what I can do.

    I'll keep posting updates as the PCBs come in, and get populated/tested.

    I'll PM those who have pre-ordered when the items are ready to ship.

    Thanks,
    5-11under

  13. #13
    Great Puma (Level 12) -hellvin-'s Avatar
    Join Date
    Mar 2004
    Location
    Glendale, AZ
    Posts
    4,739
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    This is pretty awesome, I'm pretty interested in picking one up, but I don't know when I'll have the funds to do so. I must say it looks like impressive work. Nice going man.

  14. #14
    Insert Coin (Level 0)
    Join Date
    Oct 2007
    Posts
    9
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    I've mailed out the initial order to everyone who has paid for one of these.

    I've got more available, in various states of completeness. If you'd like one at any time in the future, feel free to send me a PM, and I'll see what I can do. I don't spend too much time at DP, but I'll make a point to check my mail regularly. For fastest response, your best bet would be a PM to me at AtariAge.

    Thanks!
    5-11under

Similar Threads

  1. S-video or component?
    By teh_L0ki in forum Classic Gaming
    Replies: 42
    Last Post: 03-22-2011, 07:56 PM
  2. Wii component video cables
    By Algol in forum Modern Gaming
    Replies: 10
    Last Post: 04-16-2007, 06:36 AM
  3. Component Video Cables
    By Tempest in forum Classic Gaming
    Replies: 30
    Last Post: 04-24-2003, 07:17 AM
  4. Component video switchbox???
    By Gamereviewgod in forum Classic Gaming
    Replies: 4
    Last Post: 03-08-2003, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •