So I just got an FDS and the power supply that came with it isn't the original. The specs on the power supply that was pack with it are - AC: 100-240VAC 50~60Hz, DC 9VDC 1A, center negative. I'm wanting to know if this is the proper specs for the system and if it's ok to use this adapter on the FDS without damaging it.
*Update* - So for now I'm just using batteries in the FDS to run it and I keep getting an "Error 22" message with every disk. Checking around online seems to say that it's pretty much the belt or belt timing. I popped the top of the FDS off to make sure the read/write head was moving and it is thankfully, but very slowly. So what do I need to do to fix this? I've never owned a FDS till now so I'm completely stumped.