Results 1 to 3 of 3

Thread: Nintendo 64 RGB Woes

  1. #1
    Pear (Level 6) Custom rank graphic
    alec006's Avatar
    Join Date
    Jul 2005
    Location
    DFW
    Posts
    1,270
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default Nintendo 64 RGB Woes

    So,I have something interesting. Supposedly,I have one of the very early model Japanese N64's with RGB. I opened it up and sure enough 3 small red wires coming from R8,R9 & R10 on the underside of the board. The soldering points are too perfect to be done by man,so I'm assuming that this was indeed factory set.

    Of course,I hook it up via SCART and the signal is very dark indeed. It also has annoying vertical diagonal interference lines going across the screen. They kind of disappear when your moving in a 3D environment,but in a 2D game like Mischief Makers,they are very apparent.

    Even weirder,this may be due to the weak signal,but the left side of the screen is the correct RGB colors but the farther right you go,the picture gets yellower/greener. I hooked it up with S-Video & Composite and no yellow on the right. Also with the brightness all the way up they lines seemed more fainter.

    So my questions are, is there anywhere to buy a SCART cable with Transistors in it to amplify the signal, and what causes the annoying lines?


    S-Video: Goldeneye Menu http://i103.photobucket.com/albums/m...6/DCP_0121.jpg
    RGB: Goldeneye Menu: http://i103.photobucket.com/albums/m...6/DCP_0120.jpg

    S-Video: Surface Sky http://i103.photobucket.com/albums/m...6/DCP_0122.jpg
    RGB: Surface Sky http://i103.photobucket.com/albums/m...6/DCP_0123.jpg

    UPDATE: So it seems that it's the component input on my TV that is causing the green on the right,which sucks but I guess I can live with it for now till I get another TV

    Board: NUS-CPU-01
    Serial: NUJ10361132
    Model: NUS-001 (JPN)
    Last edited by alec006; 09-10-2010 at 10:21 PM.
    "...leave love bleeding, in my hands, in my hands again..."

  2. #2
    Insert Coin (Level 0)
    Join Date
    Mar 2010
    Posts
    153
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Most people install the rgb amp inside their n64 - you probably should look around nfg forums or that platinumfungi person to see if they could do the mod for you.

  3. #3
    Great Puma (Level 12)
    Join Date
    Mar 2004
    Posts
    4,860
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Xbox LIVE
    Jibbajaba

    Default

    You have to build an RGB amp and put it inside the N64. Well, it can be outside but that would be a pain in the ass. Here is the amp that I built:

    http://www.gamesx.com/wiki/doku.php?id=av:n64rgb-amp

    Build that on a small PC board and wire it up so that the wires coming off of the board go to the amp, and then connect wires from the amp to the appropriate AV port pins. It's a bit of work, but the picture looks great.

    Chris

Similar Threads

  1. Super Nintendo Display Woes :(
    By Sini in forum Technical and Restoration Society
    Replies: 0
    Last Post: 09-25-2012, 07:07 AM
  2. SMS Woes
    By alec006 in forum Technical and Restoration Society
    Replies: 15
    Last Post: 06-26-2010, 07:38 PM
  3. Treamcast woes
    By mezrabad in forum Classic Gaming
    Replies: 8
    Last Post: 12-24-2005, 05:48 AM
  4. Ps2 woes
    By DDCecil in forum Classic Gaming
    Replies: 12
    Last Post: 05-24-2003, 01:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •