Results 1 to 14 of 14

Thread: What electrical contact cleaner do you use and where do you get it?

  1. #1
    Key (Level 9) nebrazca78's Avatar
    Join Date
    Sep 2005
    Location
    Lincoln, Nebraska
    Posts
    1,848
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default What electrical contact cleaner do you use and where do you get it?

    I've been using rubbing alcohol to clean the contacts of my cartridge only games and it doesn't work that well. It cleans the contacts Ok but usually seems to leave some slight corrosion afterward. It's time to upgrade to the real thing but they seem to be all aerosol and I was thinking it would be in tube form. So, what do you guys use, how much does it cost and where do you get it from?


  2. #2
    Pear (Level 6) Sabz5150's Avatar
    Join Date
    Jul 2008
    Location
    Richmond, VA
    Posts
    1,342
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    PSN
    Sabz5150

    Default

    This, there and that much.

    http://www1.mscdirect.com/cgi/NNSRIT...-SearchResults

    Not cheap. Thank the gods for tool bills
    Wants:
    Starflight Starmap and Code Wheel
    Starflight II Starmap
    Got these for sale or trade? PM ME!!!

  3. #3
    Pretzel (Level 4) Polygon's Avatar
    Join Date
    Jan 2011
    Location
    Utah
    Posts
    865
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Xbox LIVE
    PolygonGTC
    PSN
    PolygonGTC
    Steam
    BlastMode7

    Default

    I've been using this.

    http://www.nintendorepairshop.com/pr...-Cleaning-Kit/

    I'd like to hear how people are cleaning the system connectors.

  4. #4
    ServBot (Level 11) Custom rank graphic
    Cornelius's Avatar
    Join Date
    Jan 2007
    Location
    Wrong Place, Wrong Time
    Posts
    3,778
    Thanks Thanks Given 
    72
    Thanks Thanks Received 
    25
    Thanked in
    24 Posts

    Default

    I haven't found a 'squirt on' solution that truly works. I use a quality metal polish (i.e. not brasso) that I found at Home Depot. I've always taken apart carts to use it, though one could maybe figure out how to make it work without.

    For system connectors I've actually had really good luck with very fine grit sandpaper wrapped around a credit card, then a 'wash' with rubbing alcohol on cotton paper wrapped around a cc. The sandpaper I use I believe is usually used for first-pass sanding on auto paint.

  5. #5
    Apple (Level 5) xelement5x's Avatar
    Join Date
    Feb 2011
    Location
    Southwest US
    Posts
    1,052
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by Cornelius View Post
    I haven't found a 'squirt on' solution that truly works. I use a quality metal polish (i.e. not brasso) that I found at Home Depot. I've always taken apart carts to use it, though one could maybe figure out how to make it work without.

    For system connectors I've actually had really good luck with very fine grit sandpaper wrapped around a credit card, then a 'wash' with rubbing alcohol on cotton paper wrapped around a cc. The sandpaper I use I believe is usually used for first-pass sanding on auto paint.
    If you've got the name of the metal polish I'd love to know

    I've used sandpaper before as well on connectors, works pretty well. For carts I'll use rubbing alcohol + art eraser + very fine steel wool (only if it's very stubborn). Don't like using steel wool too much though since it's essentially filing away the contacts over a long period of time.

  6. #6
    Pretzel (Level 4) Polygon's Avatar
    Join Date
    Jan 2011
    Location
    Utah
    Posts
    865
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Xbox LIVE
    PolygonGTC
    PSN
    PolygonGTC
    Steam
    BlastMode7

    Default

    But so is the sand paper. Which is why I'm not too keen on the idea.

  7. #7
    Captain Caveman (and Son!) Custom rank graphic
    Sunnyvale's Avatar
    Join Date
    Aug 2011
    Location
    Pacific Northwest, USA
    Posts
    1,287
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Xbox LIVE
    My XBOX is dead, not live.
    PSN
    PSN? PSchah!
    3DS Friend
    Friendless :(

    Default

    For just cleaning carts or system contacts, I use whatever contact cleaner the local automotive shop on hand. It's heavy-duty, it works, and it's cheap, less than $7 a can. For anything that will move continously (volume knobs on radios, Atari paddles...) I use the more expensive stuff they sell at Radio Shack. It also has a lubricant, and it works great. I have a set of paddles that still works great and I sprayed them almost 3 years ago.

  8. #8
    Alex (Level 15) Custom rank graphic
    Gameguy's Avatar
    Join Date
    Dec 2008
    Location
    Richmond Hill, Ontario (Canada)
    Posts
    7,918
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    78
    Thanked in
    70 Posts

    Default

    Quote Originally Posted by xelement5x View Post
    I've used sandpaper before as well on connectors, works pretty well. For carts I'll use rubbing alcohol + art eraser + very fine steel wool (only if it's very stubborn). Don't like using steel wool too much though since it's essentially filing away the contacts over a long period of time.
    Steel wool isn't that good to use, small fibers of it can get embedded in the metal that you're using it on and then it will rust. Bronze wool might be better if you need anything that abrasive. I know some bicycle collectors use bronze wool to remove rust from chrome parts instead of steel wool for the reason I mentioned. I wouldn't use anything that abrasive on games myself though.

  9. #9
    Pear (Level 6) wingzrow's Avatar
    Join Date
    Apr 2005
    Posts
    1,285
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    I swear by this stuff. It's fucking magic I swear. You can get it from walmart. Just rub this onto your contacts for NES, snes, etc, and use a non static cloth and your games will play like new. I can't even say how many games i've saved from the garbage by using this stuff, it's a miracle in a bottle.



  10. #10
    Pear (Level 6) Sabz5150's Avatar
    Join Date
    Jul 2008
    Location
    Richmond, VA
    Posts
    1,342
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    PSN
    Sabz5150

    Default

    Quote Originally Posted by Polygon View Post
    I'd like to hear how people are cleaning the system connectors.
    A piece of crocus cloth, folded over after a small spray of the CRC I posted above.
    Wants:
    Starflight Starmap and Code Wheel
    Starflight II Starmap
    Got these for sale or trade? PM ME!!!

  11. #11
    Strawberry (Level 2)
    Join Date
    Jul 2010
    Posts
    567
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    PSN
    Jaruff

    Default

    http://www.toolking.com/eagle-one-10...wadding-polish

    If you need a spray:

    http://www.autobarn.net/maairflsecl1...te=google_base

    That shit will do the trick. Not only does it clean the contacts, it won't hurt the plastic. It's somewhat expensive but it works miracles. I don't know what the difference is between this and the CRC spray Sabz recommended but the price is cheaper and you might have an easier time finding it locally.

    @wingzrow - I'll have to try that out. We have a glass cook top and use Weiman's to clean it. You're description is more than accurate.

  12. #12
    Insert Coin (Level 0)
    Join Date
    Dec 2011
    Posts
    10
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    I just use brasso very gingerly(only if it needs it) and rinse with denatured alcohol.

    Works perfectly for every cart I own.

    The Caig deoxit stuff is pretty awesome, but it's mega expensive, I tried some from radio shack and it was like 15.00 for a measly 5oz can thats easy to waste.
    Last edited by maxpacker; 01-19-2012 at 02:39 AM.

  13. #13
    Key (Level 9) nebrazca78's Avatar
    Join Date
    Sep 2005
    Location
    Lincoln, Nebraska
    Posts
    1,848
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Awesome info, thanks!


  14. #14
    Key (Level 9) nebrazca78's Avatar
    Join Date
    Sep 2005
    Location
    Lincoln, Nebraska
    Posts
    1,848
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Due to price and availability I ended up going with this one:

    http://www.ebay.com/itm/350521343650...84.m1497.l2649

    .


Similar Threads

  1. Cartridge contact cleaner ...
    By Frankie_Says_Relax in forum Technical and Restoration Society
    Replies: 6
    Last Post: 09-25-2007, 04:46 AM
  2. Contact Cleaner Pencils from Radio Shack
    By erehwon in forum Technical and Restoration Society
    Replies: 4
    Last Post: 12-21-2005, 01:28 AM
  3. Good Contact and switch cleaner
    By Blue60 in forum Technical and Restoration Society
    Replies: 0
    Last Post: 06-19-2005, 01:05 PM
  4. 99% Pure Isopropyl Alcohol (the inexpensive contact cleaner)
    By Jagasian in forum Technical and Restoration Society
    Replies: 4
    Last Post: 06-04-2005, 09:55 AM
  5. How is this possible?!? (Calling all electrical engineers)
    By jgenotte in forum Technical and Restoration Society
    Replies: 6
    Last Post: 12-04-2003, 10:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •