Results 1 to 15 of 15

Thread: Alternate AC Adaptor for NES?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Insert Coin (Level 0)
    Join Date
    Dec 2008
    Posts
    147
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default Alternate AC Adaptor for NES?

    After having some problems with my NES, I figured out that the issue was with the AC adaptor. I tried a friend's SMS adaptor and it worked just as great as it ever did.
    Now, I have found an AC adaptor with the same plug. Problem is, I'm not the best with electrical stuff and wasn't sure if it would be okay to use. Some of the stuff is the same as the official Nintendo AC adaptor, but there are differences, and I was hoping someone here could tell me whether this will be okay to use with my NES or not...

    Input: AC 120v 60Hz 6W
    Output: AC 9v 200MA

    I know some of that is the same as the official NES AC adaptor, but I'm not sure if the differences would cause a problem.
    Any help would be greatly appreciated. (:

  2. #2
    Alex (Level 15) Custom rank graphic
    Gameguy's Avatar
    Join Date
    Dec 2008
    Location
    Richmond Hill, Ontario (Canada)
    Posts
    7,918
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    78
    Thanked in
    70 Posts

    Default

    Quote Originally Posted by 369WIERDO369 View Post
    After having some problems with my NES, I figured out that the issue was with the AC adaptor. I tried a friend's SMS adaptor and it worked just as great as it ever did.
    Now, I have found an AC adaptor with the same plug. Problem is, I'm not the best with electrical stuff and wasn't sure if it would be okay to use. Some of the stuff is the same as the official Nintendo AC adaptor, but there are differences, and I was hoping someone here could tell me whether this will be okay to use with my NES or not...

    Input: AC 120v 60Hz 6W
    Output: AC 9v 200MA

    I know some of that is the same as the official NES AC adaptor, but I'm not sure if the differences would cause a problem.
    Any help would be greatly appreciated. (:
    200mA is not enough current to run an NES properly, it would cause problems. I believe NES systems require 800mA as stated on the bottom, though original adapters provide 1.3A just to be safe.

  3. #3
    Insert Coin (Level 0)
    Join Date
    Dec 2008
    Posts
    147
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Quote Originally Posted by Gameguy View Post
    200mA is not enough current to run an NES properly, it would cause problems. I believe NES systems require 800mA as stated on the bottom, though original adapters provide 1.3A just to be safe.

    Well that sucks.
    Thanks for the info!

  4. #4
    ServBot (Level 11) Custom rank graphic
    Cornelius's Avatar
    Join Date
    Jan 2007
    Location
    Wrong Place, Wrong Time
    Posts
    3,778
    Thanks Thanks Given 
    72
    Thanks Thanks Received 
    25
    Thanked in
    24 Posts

    Default

    Gameguy is right, 200mA is not enough. In general with AC adapters, you need the Voltage to match, and the Amps to be the same or higher. The device only draws whatever amps it needs and it must have enough, but the voltage is what it is and a big mismatch there can cause damage.

    Also, with the NES it is okay to use an adapter that outputs DC even though the original outputs AC. DC adapters are much more common to find. Don't go messing around with DC vs AC on other devices, just the NES.

  5. #5
    Key (Level 9) Satoshi_Matrix's Avatar
    Join Date
    Jan 2011
    Location
    Ontario, Canada
    Posts
    1,956
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    PSN
    Satoshi_Matrix

    Default

    couple things to remember:

    The NES or NES 2 Topload (NOT the Famicom or any clone) uses a AC 9v power supply. Because the NES does the voltage regulation internally, it can pretty much take any DC power supply from 9v to 12v.

    The amp rating needs to be at least 750 mA, but unlike voltage, there is no cap for how high it can be. It just won't use it. On the other hand, if you use a 12v power supply, it will act as a 9v and waste the extra electricity as heat.

    If you have an old router or phone or something like that, chances are you'll find a power supply that will work.

    just remember the golden rule: NEVER use an NES power supply on ANYTHING ELSE but an NES. The AC voltage will f*** you up.
    check out my classic gaming review site: http://satoshimatrix.wordpress.com/

  6. #6
    ServBot (Level 11) kedawa's Avatar
    Join Date
    Nov 2005
    Location
    Toronto
    Posts
    3,429
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    The TG-16 adapter is my favourite, since it isn't a wall wart.

  7. #7
    Key (Level 9) wiggyx's Avatar
    Join Date
    Feb 2012
    Posts
    1,844
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    TG-16 and Genesis model one both work fine and are cheap and plentiful.

Similar Threads

  1. NES Boxes (alternate art and repros)
    By PhoenixAries in forum Classic Gaming
    Replies: 12
    Last Post: 10-17-2012, 06:14 PM
  2. magnetica DS alternate controls
    By RJ in forum Modern Gaming
    Replies: 7
    Last Post: 10-08-2011, 02:55 PM
  3. Alternate systems controlers on PS3
    By R.Sakai in forum Modern Gaming
    Replies: 0
    Last Post: 02-17-2009, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •