Results 1 to 11 of 11

Thread: What are these white spots on NES carts?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    loves the Game Gear too much. recorderdude's Avatar
    Join Date
    Mar 2012
    Posts
    593
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default What are these white spots on NES carts?

    Got a lot of NES and SNES stuff recently that has some real good titles, but some are covered in these weird white spots, the worst of em being a copy of bartman. Image here: Click image for larger version. 

Name:	Capture_2021-03-17-03-56-181.jpg 
Views:	58 
Size:	73.5 KB 
ID:	10822
    Theyre usually somewhat hardened but scrape off like chalk. I've definitely gotten carts on multiple consoles (but usually NES) like this before so its hard for me to believe everyone just splashed white paint on them and it dried 20 years ago. Have you guys ever encountered any like these? If so, is this some kind of mold, and do I need to take any precautions when cleaning these inside and out, or are paint flecks on retro games really that common?

  2. #2
    Pac-Man (Level 10)
    Join Date
    Jan 2014
    Location
    Minnesota
    Posts
    2,919
    Thanks Thanks Given 
    107
    Thanks Thanks Received 
    105
    Thanked in
    101 Posts

    Default

    mold. seen it on VHS tapes before. Keep it seperate from other carts so it doesn't spread.

    If it were me, I'd wear an N95 and just use soap and water with a non abrasive rag to gently clean it, avoiding the label obviously. and I wouldnt touch it with your bare fingers
    Last edited by gbpxl; 03-17-2021 at 05:33 AM.

  3. #3
    loves the Game Gear too much. recorderdude's Avatar
    Join Date
    Mar 2012
    Posts
    593
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Thanks for the quick response! I've ordered some N95s (I'm sure I'll get more use out of them than just this, considering the current times) and will be wiping down each one thoroughly with gloves on.

    One more question though - obviously before the mold is cleaned off, I'll be keeping them separate, but once they're wiped down, is it okay to integrate them onto the wall with the other carts, or is there still a significant risk of mold forming and spreading to other carts since it used to be there? Having everything in alphabetical order on a shelf like a big dorky library is half the fun for me!

    Thanks!

  4. #4
    Pac-Man (Level 10)
    Join Date
    Jan 2014
    Location
    Minnesota
    Posts
    2,919
    Thanks Thanks Given 
    107
    Thanks Thanks Received 
    105
    Thanked in
    101 Posts

    Default

    Quote Originally Posted by recorderdude View Post
    Thanks for the quick response! I've ordered some N95s (I'm sure I'll get more use out of them than just this, considering the current times) and will be wiping down each one thoroughly with gloves on.

    One more question though - obviously before the mold is cleaned off, I'll be keeping them separate, but once they're wiped down, is it okay to integrate them onto the wall with the other carts, or is there still a significant risk of mold forming and spreading to other carts since it used to be there? Having everything in alphabetical order on a shelf like a big dorky library is half the fun for me!

    Thanks!
    Well maybe others here can chime on risk of spreading but me personally, I don't wanna risk it. I have a copy of Ghostbusters on VHS that I've had for months. The mold is all within the housing of the casette on the tape itself and I have never put it on a shelf alongside the others. I just don't wanna take my chances.

  5. #5
    Alex (Level 15) Custom rank graphic
    Gameguy's Avatar
    Join Date
    Dec 2008
    Location
    Richmond Hill, Ontario (Canada)
    Posts
    7,918
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    78
    Thanked in
    70 Posts

    Default

    I would have thought those specs could be from storage in styrofoam but I guess they could be spots of mold.

    Quote Originally Posted by recorderdude View Post
    Thanks for the quick response! I've ordered some N95s (I'm sure I'll get more use out of them than just this, considering the current times) and will be wiping down each one thoroughly with gloves on.
    With actual N95 masks they need to be properly fitted so you can order the correct size to fit your face, they're available in many different sizes similar to shoe sizes.

    Honestly for most mold it's not that dangerous and you don't need a mask. Most homes have some mold spores floating around at all times anyway. If you leave a loaf of bread out well past the expiry date, will it grow mold? It will only grow mold if mold is already present, and that's with your food. It's the same with leaving an open block of cheese in your fridge for months and mold starts growing, or old leftovers for weeks. Again it's only growing because it was already present, and that's in your fridge with your food.

    Quote Originally Posted by recorderdude View Post
    One more question though - obviously before the mold is cleaned off, I'll be keeping them separate, but once they're wiped down, is it okay to integrate them onto the wall with the other carts, or is there still a significant risk of mold forming and spreading to other carts since it used to be there? Having everything in alphabetical order on a shelf like a big dorky library is half the fun for me!
    Yes, once the mold is actually cleaned off then it's safe to store the carts with everything else. Mold grows on the surface of plastic, it doesn't grow through it like with paper, cloth, or wood.

    If you really want to wipe down the cases to make sure they're free of mold, after cleaning off the visible mold wipe them down with isopropyl alcohol while avoiding the label. Personally whenever I buy used items like games, DVDs, VHS tapes, books, etc; I wipe them down with paper towels and some windex. This is safe for most labels too. Usually I wipe down just the outer case, or sometimes the inside of the case if needed(like with ex-rental VHS tapes, though I also wipe down the outside of the cassette too), or even CDs and DVDs as these can be gently washed with soap and water. Not everyone takes care of their belongings to keep them clean and like new. Cleaning the dirt helps prevent mold in the future as dust and dirt provides material that mold can live off of, dirt absorbs and holds moisture from the air(this also causes rust by the way, keeping metal clean helps prevent some rust). I wouldn't just use water to consider the plastic clean. If you wanted to you could open the case and really clean out the inside to make sure nothing bad is inside, I've cleaned some of my games like this when they were in rough shape and they're easier to clean when the cases are taken apart. There's no risk of getting the circuit board wet if it's removed from the shell.

    I like to keep things clean to prevent mold from possibly spreading, and I do keep still dirty items separate from already clean items until I can clean them properly. It's the same with VHS tapes, I do have some tapes with some mold and I keep these separately from the other tapes, but I've cleaned a couple tapes already and they were safe to play. It's very time consuming and tedious to actually clean tapes properly so I tend to put off doing it.

  6. #6
    Pac-Man (Level 10)
    Join Date
    Jan 2014
    Location
    Minnesota
    Posts
    2,919
    Thanks Thanks Given 
    107
    Thanks Thanks Received 
    105
    Thanked in
    101 Posts

    Default

    I've heard of a guy who specializes in cleaning mold off tapes. I can't remember the exact method he used but I heard if you play a moldy VHS tape, the spores will contaminate the player and potentially contaminate other tapes you put in it afterwards

  7. #7
    Pac-Man (Level 10)
    Join Date
    Jan 2014
    Location
    Minnesota
    Posts
    2,919
    Thanks Thanks Given 
    107
    Thanks Thanks Received 
    105
    Thanked in
    101 Posts

    Default

    Here's a good article on mold attacking plastic

    https://ultra-fresh.com/can-mold-grow-on-plastic/

    diluted bleach or undiluted white vinegar is another good solution though Ive never tried it. I feel bleach is a little risky. Ive always had good luck with IPA too

Similar Threads

  1. Spots on GameCube discs
    By megasdkirby in forum Technical and Restoration Society
    Replies: 0
    Last Post: 03-08-2010, 02:38 PM
  2. Any good spots in DE, CON, or NY
    By RASK1904 in forum Classic Gaming
    Replies: 17
    Last Post: 03-03-2010, 06:45 PM
  3. Cold Spots
    By Pantechnicon in forum Classic Gaming
    Replies: 22
    Last Post: 06-28-2007, 07:28 PM
  4. Intellivision white label carts
    By Wookie in forum Classic Gaming
    Replies: 0
    Last Post: 09-02-2004, 12:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •