Amiga CD32 Power Supply

[dreamcaster]

Well, after almost having my CD32 for a year, I finally got the opportunity to test it out on a friend's CD32 power adapter, and yes, it turns out that my console is fine, and it's my power adapter that's died.

My question is:

- Is there anything I can do to repair the supply?

- If not, is this power supply unique to the CD32, or was it used on other Amiga computers (ergo, could I grab a replacement easily from an Amiga comp.)?

- Finally, can anyone point me in the right direction of getting one of these power supply's?

[blue lander]

As I recall, it uses a truly bizarre power supply, but I vaguely remember there is some other Amiga computer that uses the same type. I'll see if I can hunt down more specifics.

[icbrkr]

As I recall, it uses a truly bizarre power supply, but I vaguely remember there is some other Amiga computer that uses the same type. I'll see if I can hunt down more specifics.

Actually, it is unique to the CD32. You should be able to wire up an old A500/600/1200 power supply to work with it though.

[blue lander]

I thought there was some prototype Amiga computer that used the same PSU...

[Hammy]

there are some versions of the commodore 64 computer that use the same pinout. otherwise you could always get the pinout and wire up an amiga 1200, or a commodore 64 supply to it like i did with mine.

[freckledpeas]

I hear you can use a power supply from a PC to use with your Amiga CD32, as long as you have an adapter. Here's a link to one found on eBay:

http://cgi.ebay.com/Power-Supply-Ada...QQcmdZViewItem

I'm guessing you'd probably need an AT form factor power supply, so you'd have an on/off switch. Should be a cheap and easy find, though.