To open it up you're going to have to break off the small rod in the center of ever screw with a small flat head (I use a glasses screwdriver), then use a torx to actually unscrew it. It's really a pain.
To open it up you're going to have to break off the small rod in the center of ever screw with a small flat head (I use a glasses screwdriver), then use a torx to actually unscrew it. It's really a pain.
Sorry for bumping an old dead thread but I finally fixed my controller. Purchased a T-8 security screwdriver from ebay seller dagamedepot and got a good deal. Opened the controller (after finding the mystery 7th screw), pulled the board out, fiddled with the trigger mechanism, and ran an alcoholed qtip over the contacts on the component that the trigger turns. Little mini potentiometer or whatever it is. Looked like there was the tiniest little bit of white schmuntz on those contacts. Put it back together and it seems to be working fine now. Go me.![]()
Thankfully it is usually that easy. Congrats.
And HappehLemons, that has to be the stupidest thing I've read this week. It doesn't take a rocket scientist to track down a proper screwdriver. Seeing as your post is 2 years old I can only hope your advice didn't get too far.
I fix things. You name it, I'll work on it. Want something modded? Recapped?