I have a Turbografx 16, and recently purchased a Turbografx with the CD add on. Is there any Power supply that will work with it (As the one i'm getting does not come with it). Or am I going to have to fork out the $60 for ones on eBay?
I have a Turbografx 16, and recently purchased a Turbografx with the CD add on. Is there any Power supply that will work with it (As the one i'm getting does not come with it). Or am I going to have to fork out the $60 for ones on eBay?
I might have one lying around. I'll see if I can find it. But to answer your question I'm pretty sure the model 1 Sega CD ones work with it (which aren't any easier to find).
http://www.maximumcrowe.net/maximumc...outhpark3.jpeg
I bet Tugger wants to hear a song off me new album!
This might help
TurboGrafx-16
HES-ACA-01
Output: 10.5V DC 730mA
Conector: coaxial 5.5mm/2.1mm (DC plug 2.1mm)
Polarity: center negative
Alternative: Sega Master System, Genesis
TurboGrafx CD
HES-ACA-02
Output: 10.5V DC 650mA
Conector: coaxial 5.5mm/2.1mm (DC plug 2.1mm)
Polarity: center negative
Alternative: Sega Master System, Genesis 1, TG16, Atari 5200
TurboGrafx CD + TurboGrafx-16
HES-ACA-03
Output: 11V DC 1.53A
Conector: coaxial 5.5mm/2.1mm (DC plug 2.1mm)
Polarity: center negative
Alternative: ???
That list is inaccurate.
The TG16 can take Genesis/SMS/Jaguar power supplies.
The TG16+CD dock uses a physically larger connector so the TG16 supply won't fit (they're all given as the same size in the above list). I had to frankenstein my own power supply together since the OEM TG16CD supplies are hard to come by.
Would the Turboduo's power supply work on the TG16+CD? Since they're pretty much the same machine.
Hmmm... Guess there really isn't anything then.
I'll have no way to test the CD add-on when I get it. (I have a Duo, but I got the TG CD cheap and planned to clean it up some).
Bump.
I just got a Turbo Duo. What kind of power supply should I look for? Will anything with the right Volts / Amps and positive / negative center be OK?