Genesis Model 1 no video output[fixed] Help with S-Video!

[Ricky]

I was modding my genesis for s-video and then when I closed everything up and tried the to play a game nothing would come up.
Sound plays fine. I'm using the standard cable that comes with the genesis now, it has 5 pins, mono and composite out. Problem is no video.
I've checked and checked for solder bridges and damage but I can't see where the problem is. I've checked voltages out of the CXA1145P pins
and it is producing signals still. I'm sure this problem is caused by something so insignificant. I have checked all the capacitors and they are all fine.
Because the system actually works except for video I'm led to believe one of the pins on the CXA1145P are touching ground.

Any ideas?

btw I got a IC BD M5 USA mobo

Thanks.

Fixed this.

Chroma is giving me vertical lines.

Using 68ohm resistor and 220uf cap.