PS2 Slim Disc Motor Fails To Spin.

[Big Papa Husker]

I picked up a PS2 Slim from a pawn shop for $5. They said that the disc wouldn't spin, but I decided to buy it anyway and try to get it working. When I got it home I popped the top open and put a disc in, covered the 2 lid sensors and powered it on. The laser moved and looked to be trying to read the disc, but the disc itself wouldn't spin. After checking over the ribbon cables, I decided that the motor must be burned out so I jumped on ebay and ordered another motor. Fast forward to today - I got the motor in and took apart the PS2 again and installed the new motor. I powered it on with the top on and sadly it still didn't spin. I tried taking the cover off and blocking the sensors; same thing - won't spin. Does anyone have ANY idea what could be wrong with it?

[Polygon]

It could be a problem with the lens.

[Big Papa Husker]

It could be a problem with the lens.

That could stop it from spinning? Is there anything specific to look at on the lens to determine whether it is the lens causing the problem?

[Polygon]

That could stop it from spinning? Is there anything specific to look at on the lens to determine whether it is the lens causing the problem?

Well, I've never worked on a PS2 but I've seen that happen on a Saturn where the disc would not spin up because of a bad lens unit. In that case the lens would try to focus in and out but would not read the disc. You could try cleaning the lens for the hell of it, look for defects on the lens, and check the connections for the lens unit.

[APE992]

Could be a fuse.

[Niku-Sama]

i've had them not spin up while trying to adjust the pots on the lens assembly, might need an adjustment or a new lens or a whole new unit.

either way replacments are cheap:
http://dx.com/s/ps2+lens