Does the SNES mini have a better picture (more crisp and clear) then the original SNES using composite cables?
Technically yes it does using the basic RCA cable. The thing is the SNES does have various revisions on the old style unit, and the 1CHIP technically looks equal if not better than the mini system, but it still on a few games can display this faint bar up the middle of the screen (see online for pic/video of it on the FF3 title screen.) Previous models and the ghetto cheapo parts one after 1CHIP displays that bar to a greater degree.
Well not entirely without opening it up. Looking down the cartridge slot though increases your chances because around the actual slot for the games you can see a little bit into the system and the bracket I believe on a 1CHIP(and later) is black plastic. There are other ways, google it, as I think something about the odd little holes cut into the bottom of the machine can be a tell too. If you open it, the thing straight up says 1CHIP on the inside.
I do know one dead giveaway if the owner didn't play a mix and match game to make a set -- Donkey Kong Set's are all 1CHIPs, which is what I've got.
It's my understanding that the SNES mini won't support s-video. Someone correct me if I'm wrong but this was the reason I got rid of it and kept the original model.
Death to Videodrome! Long live the new flesh!
With a simple mod you can restore s-video and rgb.
I sent a SNES mini away for a RGB mod, and I hope to get it back soon. Supposedly, the SNES mini has the best video output of any of the versions released, but you have to mod it internally to access the RGB signal.
As good as a regular SNES already looks, I kinda wonder how it could even look better, but it's worth the minor expense to try it out..
Don't think so - that's probably the 1-CHIP SNES. Different reports say different things, though: Some people report more buzzing on a mini than another system, etc.
The RGB encoder might be newer here than in the older versions.
Probably the most important thing is not the system itself, but the cables you use. Lots of cables have been sold that aren't adequately shielded, and grounding the cables apparently also helps too.
The 1-CHIP SNES which includes the mini use the same video encoder S-RGB,funny enough the same encoder is found on the french n64
This is a good guide to check without opening up the system. I have a 1CHIP-03 and I loves it.
https://docs.google.com/spreadsheet/...nc&output=html (neglected to actually add this link earlier)
Technically you could also probably weigh it since the 1CHIP motherboard is tiny. You'd need a pretty accurate scale though I think.
FWIW the main difference between 1CHIP and all of the others is that the image doesn't have what some consider a filter on it. The other chipset's PPUs seem to blend the pixels together a little bit. I've only really messed with them via RGB though, so composite might not be as noticeable.
Last edited by Einzelherz; 05-04-2014 at 08:09 AM.
Is there a way to restore Component (NOT Composite nor RGB, tough Component is 2nd to next in quality with RGB) to a SNES mini!?
wait some of the snes's out there supported component?
how do you tell which ones do, sounds like an interesting mod
one of the problems of converting RGB to component, is that sometimes the screen will be "off" to the right or left, and unless your monitor has controls that can adjust that, you can kinda be screwed. I have a Kramer FC-14 RGB to Component transcoder, and while it does a good job overall, sometimes the image will be slight off to one side or the other, and it can be kinda irritating.
That UN3 is a strong possibility, mine has that. I also double checked just now the cart slot and to the sides set flush to the base inside it has black plastic to each side holding the pin slot in place, older systems were metal I think (or another color.)
Not the best, blow up the images and stare hard, you can see the 1CHIP has the best sharpness, contrast and brightness.
http://retrorgb.com/snesversioncompare.html also go here for great comparison, roll mouse over images http://sd2snes.de/blog/archives/75
Read the third post here in this thread for a beautiful write up on why the 1CHIP is the best version too.
http://www.assemblergames.com/forums...-SNES-revision
The guy is a bit of a video snob being a hardware modder, he talks up the 1CHIP then rips into it like the others as he's into RGB/svideo modding them.
Yeah, if you just want to use composite, go with the mini. The beauty of the original model is that is has native s-video, and at least one revision is known to have native component. But if that level of picture clarity isn't that important to you, I'd just go with the mini for its composite. Technically the 1 chip might provide slightly better composite picture, but the difference would be negligible. If you go with a mini, you are guaranteed quality composite picture that is superior to the vast majority of model 1s.
Watch my videos, will ya?! https://www.youtube.com/user/profholt82
Sticking with composite the 1CHIP and the Mini are basically equals. The mini perhaps edges it out barely, if your system happens to get that very fair vertical line up the center with the right 'shade' of black used by a game (FF3 title and also Super Metroid first landing on the planet background shows it.) They visually work equally as nice so it comes down to your preference of cosmetic system body, and if you ever think you may want to use s-video which the mini can't do without modding.