Got it! I found a pinout for the NAND gate. Pin 10 out of the pong went to pin 6 and 5 of the Nand gate which were "1b" and "2b" in so from pin 4 which as "out b" it went to a 30k ohm resistor and then into the video circuit. I de-soldered the resistor and ran it from the bridged pin 5 & 6 straight to the video circuit and voila! Thank you very much for your help jb143! I have no idea why it doesn't work through the NAND gate (especially since I replaced it with a new one) but I am fine with bypassing it as long as it works. Hope this helps somebody in the future.