Quote Originally Posted by Porkchop
Let's try this again. I had to do some thinking on this one. Here is what you need:

1. A Pelican selector switch that they sale at Walmart or Gamestop for 19.99. The Pelican one has an RF Modulator built in which you will not need so if you can find the one made by Interact with out the Rf Modulator it will also work and cost about half as much. I sure you can also find someting at Radio Shack that will work.

2. An RCA plug to Coax converter. Radio shack should have these but if not try

http://www.electricquarter.com/cadapter.htm

3. An Cable with a Maie RCA plug on each end.

What you will do is plug each system's RF plug (RCA plug) into one of the yellow video in plugs on the Pelican selector. Then run the RCA cable from the yellow video out to the RCA to coax converter, and plug the coax end into the TV.

This setup will allow you to have 5 classic systems hocked to one TV.


This is the cheapest way I could find to do this. The only problem is the Pelican does not come with lables for Atari 5200 or O2 You will have to make your own lebles.
Ok I had to read that a couple of times, but now it makes sense. That's brilliant! I never thought about NOT putting the adapter on until after the signal was split ...