Ok, so I have consulted many times with Sir Stonic, and I decided to reach out before I buy two $90 replacements trackballs.
I have a Blades of Steel machine. Works great, less filling, etc etc, except an issue with the trackballs. Whenever I try and move my guy, it's like a damn workout. I have to spin the thing like crazy to get the guy to move, and it's very, very difficult to keep up with the computer.
What could be wrong? Is this how the game is? On Scott's advice, I soaked the bearing in 3-in-1 oil for a few days. No improvement. I couldn't get the bearings attached to the spinners off, I can't get enough torque or something to remove the tiny screws. The poles aren't worn. I have the manual, and I'm still trying to figure out how to get into the test settings. The spinner spins when you roll the ball, but it stops the second the trackball stops moving. Is that the way it's supposed to be?
Could it be the opta boards? Bad control connections?
Ask any more questions. Scott directed me to some new parts, but either way, it's at least $80 I'd like to avoid spending if possible.
dave