.....
.....
Last edited by Nintendo Gamer; 01-26-2016 at 07:22 PM.
Make sure you have the portion of the connection cable that adapts it to fit your model 1 (normally it fits a model 2, the adapter portion converts it to the larger DIN plug you require). Beyond that, a basic AV cable to go from the 32X to your display and an extra model 2 power supply to make the 32 run are all you really need.
Well, that and a game. Games usually make it work much better.
Wants:
Starflight Starmap and Code Wheel
Starflight II Starmap
Got these for sale or trade? PM ME!!!
.....
Last edited by Nintendo Gamer; 01-26-2016 at 07:21 PM.
You will need a model 1 power supply to handle the Genesis itself. Beyond that, the video is piped through the 32X and all data is handled via the cartridge slot.
So what you need is:
Power brick for the Genesis (model 1)
Power brick for the 32X (model 2)
Passthrough cable (you have this)
A/V cables for model 2 Genesis or 32X (they are the same)
That ought to do it
Wants:
Starflight Starmap and Code Wheel
Starflight II Starmap
Got these for sale or trade? PM ME!!!
You actually need two cables for the connection between the 32x and the Genesis. The regular 32x connection cable is made for a model 2 Genesis. There's a second cable that hooks to the end of that cable (where it would plug in to the model 2 Genny) and has a Genesis 1 end on the other side.
Website GameTrog sells new 3rd party cables to connect the Model 1 Genesis directly to the 32X, one wire only unlike the two before. They are only 14.99, which is darn cheap.
The Paunch Stevenson Show free Internet podcast - www.paunchstevenson.com - DP FEEDBACK
.....
Last edited by Nintendo Gamer; 01-26-2016 at 07:22 PM.