Aother update: I did find a few loose wires. i think they broke loose when I movied the parts over. Tapes weren't enough at all :P resoldered them, rechecked the connection, used epoxy to lock down wires. Now I'm getting cleaner pictures!

I also uploaded an updated NES/FC pinout Pin #58 and #65 was wrong (got it from NESDev site! you'd think an expert there would know better... )

58 is not A13 but actually VRAM enable. It could be used as A13 but it's not officially listed as that.
pin 65 is also not pin A13 (that's why I checked schematic, there is no reason to have 2 same address line) It's actually system clock.