Drilling out SNES screws :C Black screen of death..

[SuperSonic]

1st, you cannot replace the cart connector on the mini, so scratch that off your list of to-dos.

2nd, like he ^^^ said, buy some Gamebits. They're an entirely worthwhile investment.

3rd, what are the symptoms? Have you tested the AC adapter to make sure that's not the issue? Does the TV flicker when you power up the SNES?


Here's what I use to clean cart connector pins. Works about 95% of the time.

http://www.crescentartists.com/artbo...tboard_ill.htm

Illustration board comes in quite a few thicknesses and can be cut down to little pieces that are the exact size of the cart connector that you're trying to clean. The usable surface side of the cold press board has a good amount of texture in it so it's quite effective for pulling crud and debris from the pins. You can even add a little isopropyl or other cleaner to the board if you like. Use it like any other cleaning kit, which is done by inserting the board into the port over and over again.

If that doesn't work, then the last ditch effort is to wrap a piece of 1500-2000 grit sandpaper around the board and give it 3-4 insertions into the cart port and then try a game. If still not working, then repeat. If still not working after 2-3 rounds, then you very likely have a different problem.


The only place you'll find a replacement SNES mini button is to scavenge it from another, unless you can find someone parting out SNES minis on eBay or the like.

Sorry, I already have gamebits and I should have clarified that I am having problems with two SNES's one regular that turns on and is just black screen from dirty/wore out contacts and a mini with a broken reset. It looks like it may have been open before and the person put the screw back into too tight. I even tried melting a plastic pen to it but it breaks the plastic lol. So I am going to have to drill it out. But I do have a broken mini button. Now the button doesn't work but the external plastic is fine. I saw on youtube a guy said you can find a replacement button at radioshack but didn't give a part number.

From my understanding the 62 pins are replaceable but they also cost 14-20 dollars. That is half the cost of a SNES system I am just curious how well it works and if its worth it. Anyway, Ill try the sand paper.